Water, Isobutane, Tetrasodium Dicarboxyethyl Stearyl Sulfosuccinamate, Propane, Dipropylene Glycol Propyl Ether, Phenoxyisopropanol, Sodium Benzoate, Sodium Silicate, Fragrance / Parfum, Carboxylated Polymer, Sodium Citrate, Dipropylene Glycol Phenyl Ether, Ammonium Hydroxide, Methylchloroisothiazolinone, Methylisothiazolinone
Resolve® pet high traffic foam carpet cleaner is safe to use wool, nylon and stain-resistant carpet.Before Cleaning: Vacuum carpet thoroughly to remove loose dirt. Test a small, hidden area for colorfastness and examine when dry. If color is affected do not use. For upholstery, look for manufacturer's cleanability code tag. Use on fabrics coded "WS" or "W". If coded "X" or "S", do not use. Not Recommended for use on velvet, silk, vinyl, or leather. Do not use resolve® easy clean pro on any surface other than carpets. Do not Spray directly on pets. Directions:• Large area carpet cleaning:1. Shake can Well. Hold can upside down about 2 feet above carpet. Spray foam evenly over a 3 foot square area. 2. Work the foam into carpet in two directions using a damp, colorfast mop. 3. Repeat steps 1 & 2 untill the entire area is cleaned. 4. When dry, vacuum thoroughly to remove dried foam and loosened dirt. For best results: Use vacuum cleaner with a fresh, empty bag. • For use in resolve® Easy clean pro carpet brush:1. Remove spray cap from resolve® high traffic foam 22 oz can. Shake the can vigorously before each use. If the can is already in the gadget, remove and shake again. 2. Insert can into the gadget and rotate clockwise until it gently clicks into the locked position. 3. To remove the can, rotate counter-clockwise into the unlocked position and gently pull upwards. 4. Pull trigger to dispense foam, then brush the foam into the carpet. When dry, vacuum thoroughly to remove dried foam and loosened dirt. 5. Replace spray cap to can for standard use. • Upholstery cleaning:1. Blot wet soils with a clean absorbent cloth. 2. Shake can well and generously apply directly to stain from a distance of 4-6 inches. Allow foam to absorb into stain for 3 minutes. 3. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. Do not overwet fabrics. Hint: To avoid rings, clean entire section where soil occurs. 4. Rinse sponge of cloth and repeat as necessary. Allow fabric to dry thoroughly before use. 5. Only use spray cap to dispense foam for upholstery cleaning.To ensure complete dispensing during life of product, tilt can downwards at approximately 60deg While spraying. Contents will clean a carpeted area of 168 square feet (12' x 14'). If accidentally sprayed on wood furniture, just wipe off.
Always refer to the actual package for the most accurate information