Attacks Tough Odors: Musty towels; Sweat; Body odor.
Read Before Use: 1. Always test OxiClean on an inconspicuous area first. Rinse, allow to dry. 2. Do not use on wool, wool blends, silk, silk blends, leather or on fabrics labeled dry clean only. Not for use on jewelry, latex paints, woven baskets, unpainted wicker, jute, teak, or finished woods. Metals must not be soaked and must be rinsed immediately and thoroughly. Not for use on rust, dried paint, or bleach damage. Safe for septic tanks. 3. Follow manufacturer's instructions for water temperature and for cleaning garment or item. For Best Results: 1. Launder in the warmest water recommended by the garment care label. If washing in cold water, first dissolve in 16 oz. of hot water. Add to cold water. 2. Presoak for 6 hours to remove tough stains and odors. Whites/Colors: Cleaner, Fresher, Brighter, Whiter. Add to every load. Safe for all colors. Top Loader: Fill washer with water. Add OxiClean and detergent before adding laundry. Fill to Line A to C for regular loads, or more for large or heavily soiled loads. HE Washer**: Add OxiClean to washer before adding laundry. **Do not mix OxiClean with detergent in the dispenser. Read your your HE owner's manual for instructions. Tablecloths/Uniforms: Tough Stains and Odors. Mix until completely dissolved. Soak for best results. 1. Mix: Use up to full scoop per gallon of water. Submerge items in solution after dissolved. Use up to full scoop for extra tough stains and odors. 2. Soak for 1-6 hours. Depending on severity of stains or odors, some items may require more time to soak. 3. Wash as normal with detergent and OxiClean. Upholstery/Carpets: Soft Surface Stains: Use warmest water possible. 1. Mix: Fill to Line A per 16 ounces of water. Remove excess stain before treating. 2. Apply only enough solution to saturate stain. Allow solution to stand 1-5 minutes. Do not allow solution to dry on fabrics. 3. Blot with a white towel. Repeat steps 2 and 3 until stain is not visible. 4. Rinse with clean water and blot until dry. Grout/Patio: Hard Surfaces: Use solution within 6 hours. 1. Mix: Use up to full scoop per gallon of water. Note: For some surfaces, like grout, a more concentrated solution/paste may be used. 2. Apply using a cloth, sponge, brush, or by pouring solution directly onto surface. 3. Let stand 5-30 min. Scrub as needed. For large surfaces, work with small areas, so solution does not dry on the surface.
Always refer to the actual package for the most accurate information