Storage: after each use, wipe nozzle with a dry cloth, and tightly replace lid. Store in cool, dry place. All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. Gorilla Glue will stain skin and ruin clothes. 3 easy steps: 1. Damp it: Gorilla glue is cured with moisture. Lightly dampen one surface with water. Do not add water to bottle. 2. Glue it: Spread a thin layer of Gorilla Glue on other surface. A little goes a long way. Do not over apply glue. 3. Clamp It�: Clamp objects together for 1-2 hours. You can use heavy objects to achieve clamping pressure. Bond line improves with better clamping. Note: do not over apply glue. A little goes a long way. While curing, glue will expand 3-4 times creating an incredibly strong bond line. Be careful of squeeze-out. Not recommended for use on polyethylene or polypropylene plastics. 3 easy steps: Damp it*: to activate Gorilla glue. Glue it: expands, use sparingly. 60 min. Clamp It�: for an incredibly strong bond. For more information see back panel. *Lightly dampen surface. Do not add water to bottle. Keep card for important product information. Clean-up: wipe wet glue off project immediately with dry cloth and/or paint thinner. Cured glue can be removed from work piece with chisel, scraper or sandpaper. See first aid for removal from skin. Min. coverage: 1/2 oz per sq ft. Open working time: up to 10-15 minutes. Clamp: 1-2 hours at 68-120 degrees F. Best at room temperature. Cure time: 80% in 1-2 hours. Allow bond to cure for 24 hours. Full cure dependent on temperature and humidity. Moisture content: best results from 10-25%. Below 10%, dampen surface with water.
Always refer to the actual package for the most accurate information