4. Directing the device away from your face, place the device where chosen. Ensure it is at least 6 feet from the floor level.5. The aerosol refill will require changing when the fragrance is no longer emitted. Directing the device away from the face, turn the switch on the side of the device to the 'off' position (this resets a spray counter), replace the aerosol refill, and select your chosen fragrance intensity level. Directions for UseRead safety information carefully before use. Retain instructions for future reference.1. Ensure the control wheel on the back of the device is in the off position. To open, press down the button on the back of the device and pull. Ensure your fingers are not on the seam on the sides of the device. Insert 2 AA/LR6 batteries. Ensure the positive (+) and negative terminals are aligned correctly.2. Before inserting the aerosol refill, ensure the red lever inside the device is pushed up. Then insert the aerosol refill with the spray nozzle facing out.3. Close the device. Direct the device away from your face and select desired fragrance intensity using the control wheel located at the back (low, medium, high). When activated, the device will spray after a delay of 15 seconds. If there's no spray after 15 seconds, switch off the device: a. Check that batteries are inserted correctly b. Remove aerosol refill and push up red lever (see diagram number 2).
Always refer to the actual package for the most accurate information