Note: Use only per label directions. Step 1: Remove any dirt or debris that may be present on headlight. Step 2: Spray headlight and polishing pads with Rain-X Lubricant. 1) Use polishing pad No. 1 in a firm diagonal motion (as shown in diagram) covering the entire headlight area, continue until headlight has a uniform color and texture. All yellowing should be removed at this step. An unclear appearance is normal at this point. Wipe clean and proceed to polishing pad 2. 2) Use polishing pad 2 in a firm linear motion until entire area of headlight has been treated at least twice and is uniform in appearance and texture. Wipe clean and proceed to polishing pad 3. 3) Use polishing pad 3 in a firm diagonal motion covering the entire headlight area until smooth to the touch. Wipe clean and allow to dry. Step 3: Apply generous amount of Rain-X Headlight Restorer onto microfiber cloth and rub and rub onto entire headlight area using a firm circular action. Repeat until all haze is removed and headlight has a clear appearance. Rinse with water and wipe dry. Step 4: Spray Rain-X Sealant onto a clean cloth or paper towel and apply uniformly to headlights.
Always refer to the actual package for the most accurate information