Preparation: Protect work area Surfaces should be clean, dry and free of grease or oil. Roughen smooth surfaces for better adhesion. How to Open and Mix: 1. Remove cap from plunger. 2. Pull plunger back slightly and cut off end tips of syringe. 3. Turn nozzle end up and allow air bubbles to rise to top. Press plunger to expel air. 4. Dispense Resin-Hardener in equal amounts on a clean, discardable surface. 5. Mix thoroughly with a discardable stick (not included). Application: Apply to surfaces to be filled or bonded. Join surfaces and support parts until bond sets (approx. 5 min). Clean Up: Remove excess glue immediately with mineral spirits, acetone or rubbing alcohol. Wipe syringe tips clean, retract plunger slightly and close with the cap provided.
Always refer to the actual package for the most accurate information