Shake well. Shake vigorously to mix ingredients, then shake gel into nozzle prior to use. 1. Protect work area from spills. 2. Clean and dry surfaces to be bonded. 3. With cap on bottle, shake product, then turn product upside down and tap on hard surface to shake gel into bottle nozzle. 4. Remove cap and apply a small amount of Gorilla super glue gel to one surface. Only one dab per sq. Inch recommended. Set time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or failed bond. 5. Press the two surfaces together for about 10-30 seconds. Wait 24 hours for full cure. After using, clean nozzle with a dry cloth and replace cap. Store in cool, dry place.
Always refer to the actual package for the most accurate information