Can be cut for easy of storage. All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. Gorilla Glue will stain skin and ruin clothes. To puncture, place cap and nozzle on the tube and tighten down. Damp it! Lightly dampen one surface with water. Do not add water to tube. Glue it! Spread a thin layer of Gorilla Glue on other surface. A little goes a long way. Do not over apply glue. Clamp it! Clamp objects together for 1-2 hours. You can use heavy objects to achieve clamping pressure. Bond line improves with better clamping. Full cure in 24 hours. Clean-up: Wipe wet glue off project immediately with dry cloth and/or paint thinner. Cured glue can be removed with chisel, scraper or sandpaper. Storage: Opened product can be stored for up to several weeks if proper precautions are taken. After each use, wipe nozzle with a dry cloth, and tightly replace lid. Store in a cool, dry place. Min. Coverage: 1 tube per 6 in2. Open working time: Up to 10-15 minutes. Clamp: 1-2 hours at 68°-120°F. Best at room temperature. Cure time: 80% in 1-2 hours. Full cure in 24 hours. Cure time dependent on temperature and humidity, Moisture content: Below 10%, dampen surface with water.
Always refer to the actual package for the most accurate information