1. Damp it! 2. Glue it! 3. Clamp it!® All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. Gorilla Glue will stain skin and ruin clothes. 3 Easy steps: 1. Lightly dampen one surface with water. Do not add water to bottle. 2. Spread a thin layer of Gorilla Glue on other surface. 3. Clamp objects together for 1-2 hours. You can use heavy objects to achieve clamping pressure. Bond line improves with better clamping. Full cure in 24 hours. Storage: After each use, wipe nozzle clean with a dry cloth. Squeeze all air from bottle. While still squeezing, tightly replace lid. Store in a cool, dry place. Clean-up: Wipe wet glue off project immediately with dry cloth and/or paint thinner. Cured glue can be removed with chisel, scraper or sandpaper. Min coverage: 1/2 oz. per sq. ft. Open working time: 10-15 minutes. Clamp: 1-2 hours at 68-120°F. Best at room temperature. Cure time: 80% in 1-2 hours. Full cure in 24 hours. Cure time dependent on temperature and humidity. Moisture content: Below 10%, dampen surface with water.
Always refer to the actual package for the most accurate information