Elmer's ProBond Advanced is a 100% weatherproof multi-surface bond with no foam and no mess. Non-toxic
Application: use on clean, dry, oil and grease-free surfaces. Surfaces must fit snugly. Sand very smooth surfaces with medium grit sandpaper. Use when air, glue and parts are above 60 degrees F. ProBond Advanced is designed to dispense easily however, it will set fast. Just hold the two pieces together before clamping to eliminate movement of the parts. For porous surfaces, apply glue liberally, press and clamp. For paper, cloth, etc. apply thinly, press and let dry. For all other surface bonding apply glue, press together immediately and clamp or apply weight. Keep clamping pressure for 2 hours or longer. Let dry for 24 hours before handling. For semi-porous and non-porous surfaces it may take several days for full strength. Close bottle after use. Clean-up: use damp cloth before glue dries. Note: not for submerged or heated surfaces. Keep from freezing. Store at room temperature.
Always refer to the actual package for the most accurate information