Stabilized with Phosphoric Acid, Clear Care Cleaning & Disinfecting Solution is a Sterile Solution Containing Micro-Filtered Hydrogen Peroxide (3%), Sodium Chloride (0.79%), a Phosphate Buffered System, and Pluronic (Pluronic is a trademark of BASF), 17R4 (a Cleaning Agent), This Carton Also Includes a Specialized Lens Case with Neutralizing Disk
To ensure proper disinfection of your lenses you must follow the instructions completely. Do not skip any steps. Always wash and rinse your hands before handling your lenses. Please refer to the package insert printed on the inside of this carton for special instructions for RGP lenses. Watch the bubbles go to work! 1. Remove and place each lens into the appropriately marked L/R domed lens holder. Rinse with clear care* solution for 5 seconds. 2. Fill the clear care lens case to the fill line with clear care solution and place the lens holder in the case. 3. Tighten the cap on the clear care lens case and store lenses for at least 6 hours. Do not shake the case. Your lenses are ready to wear after soaking for 6 hours. No final rinse with saline is necessary. Dispose of your old clear care lens case with each new purchase of clear care solution. Always follow your eye care professional's instructions. Please refer to the package insert printed on the inside of this carton for detailed directions and important safety information. Keep clear care out of reach of children. Store at room temperature. Once bottle is open, discard any remaining solution after 3 months.
Always refer to the actual package for the most accurate information