Command Sawtooth Sticky Nail Hanger. Contains: 1 Hanger, 2 Large Strips, 2 Sets of Mini Strips
To apply: 1. Clean surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips. 2. Red side: Remove red liner. With the nail at the top of the hanger, press adhesive to back of sticky nail. 3. Black side: Remove black liner. 4. 30 seconds: Press sticky nail firmly for 30 seconds. Wait 1 hour before use. To apply stabilizer strips: 1. Clean surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips. 2. Snap! Press fasteners together until they snap. 3. Back: Remove one red liner. Position one set of strips on the lower portion of frame. Press firmly. Repeat with other set of strips. Remove remaining red liners. 4. Front, 30 seconds, Hang frame using sticky nail, straighten frame as desired. Press firmly on each set of strips for 30 seconds. To remove: 1. Never pull strip towards you. 2. Straight down slowly: Hold sticky nail gently to prevent sticky nail from snapping fingers. Do not press sticky nail against wall. 3. 15" 38cm. Stretch straight down along wall at least 15 inches (38 cm) until strip releases from wall. *Holds most frames up to 11" x 17" (27.9 cm x 43.1 cm) or maximum 5 lbs (2.2 kg). Important: failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit command.com.
Always refer to the actual package for the most accurate information