3M. 1 Hook; 2 Large strips. Holds on strongly. Comes off cleanly. No surface damage. Each hook holds 5 LBS. Designer large hook and adhesive strips. Hook made in China. Strips made in U.S.A.
Follow instructions carefully! Save instructions for clean removal in the future! To Mount: 1. Clean surface. Use isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. 2. Separate strip. Remove red liners. Apply strips as shown. Press firmly. 3. Remove black liners. Mount hook and press entire hook firmly for 30 seconds. 4. Wait 1 hour before use. Save instructions for future removal. To Remove: 1. Slide hook cover up to reveal base and removal tab. 2. To prevent base from snapping your fingers, hold base as shown. Do not press base against wall. Never pull the strip out at an angle. Strip could break or damage the surface. 3. Slowly slide the tab straight down against the wall stretching the strip at least 15 inches until base releases from the wall. Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could lose adhesion above 105 degrees F (40 degrees C).
Always refer to the actual package for the most accurate information