3M. 1 hook; 2 large strips. Damage-free hanging. Holds strongly. Removes cleanly. Hooks made in Mexico /Strips made in USA with US and globally sourced materials.
To apply: 1. Clean surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips. 2. Remove red liner. Press adhesive to hook. 3. Remove black liner. 4. Press to surface for 10 seconds. 5. Important: for maximum holding strength slide hook off. 6. And press base firmly for 30 seconds. 7. Slide hook on. 8. Wait 1 hour before use. To remove: 1. Slide hook up to remove from mounting base. 2. Never pull strip towards you. 3. Hold base gently to prevent base from snapping fingers. Do not press base against wall. 4. Stretch straight down along wall at least 15 inches (38 cm) until base and strip release. Important: Failure to follow instructions carefully may cause damage. Save instructions for damage-free removal or visit command.com. Note: apply to surfaces above 50 degrees F (10 degrees C). Adhesive could lose adhesion above 105 degrees F (40 degrees C).
Always refer to the actual package for the most accurate information