Timeless, Metallic Coated. Contains 1 hook, 2 strips. Holds up to 1 pounds.
To Apply: 1. Clean surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips. 2. Remove red liner. Press adhesive to hook. 3. Remove black liner. 4. Press to surface for 10 seconds. 5. Important: For maximum holding strength slide hook off. 6. And press base firmly for 30 seconds. 7. Slide hook on. 8. Wait 1 hour before use. To Remove: 1. Slide hook up to remove from mounting base. 2. Never pull strip towards you. 3. Hold base gently to prevent base from snapping fingers. Do not press base against wall. 4. Stretch straight down along wall at least 6 inches (15 cm) until base and strip release. Important: Failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit command.com. Note: Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could lose adhesion above 105 degrees F (40 degrees C). Not intended for picture hanging. Instead use Command Picture Hanging Strips, Sawtooth or Wire-Backed Hangers. Hook can be reused with Command Small Strips.
Always refer to the actual package for the most accurate information