3M. Hold on strongly. Comes off cleanly. No damage to walls or posters. No staining walls. Poster Strips with Command adhesive.
To apply: 1. Clean surface with isopropyl rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips. 2. Remove green liners. Position strips on back of poster as shown. Press firmly. 3. Remove black liners. Position poster on wall. Important: press each strip firmly for 30 seconds. To remove: 1. Lift corner of poster to reveal tabs. 2. Never pull strip towards you. 3. Lightly press top of strip and grab tab, stretch slowly straight down along wall. 4. Continue stretching at least 6 inches (15 cm) until strip releases from wall. Important: failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit command.com. Note: Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could lose adhesion above 105 degrees F (40 degrees C).
Always refer to the actual package for the most accurate information